Heil PR 22 Mic
This special Spotlight Series edition of the Heil Sound PR 22 Microphone delivers the same outstanding versatility and range of the original. It comes in several slick colors.
The Heil PR 22 represents completely redesigned dynamic microphone technology designed for a wide range of professional applications such as live sound, commercial broadcast, and sophisticated recording. The microphone's wide frequency range and outstanding, low handling noise outperforms the tired, 30+ year old industry technology and can withstand huge amounts of SPL. The end result is a mic that can answer the call to any application. For example, the gorgeous upper mid range makes the Heil PR 22 among the best live vocal microphones, while its outstanding frequency response and superb dynamic range suit it perfectly for use with a snare drum.
Since 1982, Heil Sound has been ranked with the leading manufacturers of communications microphones and has a paramount understanding of phasing. When properly applied, this knowledge creates outstanding cardioid patterns with unbelievable rear rejection that removes unwanted sounds that try to enter from the off-axis rear. Its pattern control is outstanding. This exceptional performance is achieved by using the ideal combination of materials for the large low mass diaphragm and a special mixture of neodymium, iron, and boron that gives the PR 22 the strongest magnet structure available.
In addition to the special magnet structure, the Heil PR 22 microphone achieves its exceptional performance by using a large 1-1/8" low mass voice coil assembly with a very unique internal sorbothane suspension system that has been designed to reduce undesirable handling noise. Special attention has been paid to the phasing plug assembly with equally placed ports that sense audio from behind, entering them out of phase. Thus, it produces a very linear cardioid pattern and reduces the proximity effect while achieving perfect articulation. This Heil element is usable in extreme high sound pressure levels and is immune to overload conditions, making this dynamic mic perfect for vocal and live sound applications.
Just like the PR 22, the Heil PR 30BB represents completely original dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Its smooth, wide frequency range sounds like a ribbon but can withstand large amounts of SPL. Outperforming the tired, 30B-year-old technology of the industry, the large diameter of the PR 30B's dynamic element produces an outstanding upper mid-range that makes the PR 30B an ideal guitar microphone, while still an excellent choice for reproducing the human voice.
The pattern control of the Heil PR 30B is outstanding. This exceptional performance is achieved by using the ideal combination of materials for the large low-mass diaphragm and a special mixture of neodymium, iron, and boron that gives the PR 30B the strongest
magnet structure available. These features allow the microphone to achieve magnificent dynamic range. A unique screen system using two different diameter mesh screens and an internal breath blast filter allow the user to talk closely to the microphone with little worry of pops or excessive sibilance. The large diameter dynamic element is mounted in a unique sorbothane shock mount atop a non-resonant fixture, decoupling the element from the massive steel body. This body and the internal humbucking coil removes any worry of using the PR 30B near monitor screens or noisy lighting fixtures aand controls. The new technology of the Heil PR 30B has redefined the dynamic microphone with superior wide frequency response, low presence of noise, flawless design, and elite quality expected by an innovator and leader in the field.
PR 48 mic
The PR 48 kick drum microphone starts with Heil's 1.5" large diaphragm dynamic element sealed in a vulcanized shock mount and fed with a specially designed low-pass filter that creates a 10dB rise from 60Hz to 100Hz — right where the kick drum resonates. It stays out to 7.5 kHz and drops off drastically to eliminate any unwanted internal sounds. The total frequency response is 30Hz - 8.5kHz (4dB rise @ 4500Hz). Its rear rejection is -40dB @ 180° off-axis. It can handle +148dB SPL.
The PR 48 metal housing was designed with a slanted entrance to the 3-pin XLR so the cable assembly is easier to connect. The microphone provides a 600 ohm balanced output.
The Heil HDK drum kit series is a culmination of over 2 years spent on the road with leading drummers. They gave Heil their ideas, dreams, and needs which Heil then turned into reality. Every component of a drum kit needs special attention when it comes to reproducing the sound accurately. There are many drum microphones out there, but the artists that helped design the Heil drum microphones wanted more accuracy, not just level. Each one of them were tired of little plastic toys that did not reproduce well. They all agreed, after hearing and using the new technologies of the Heil drum microphones, that they had never heard this level of quality reproduction.
PR 28 mic
The PR 28 is Heil's premier drum microphone. Its tight cardioid pattern, wide frequency response, and stellar rear rejection make it ideal for toms, snares, bongo, and many other applications. A unique dual suspension system between the actual dynamic element and the grille and body reduce unwanted vibrations.
HH-1 mounting kits
The HH-1 is a unique mounting kit that is fully adjustable so you can mount a Heil PR 28 on the rim of the mounting hoops of the tom drum.
Heil Sound HDK-7 Includes
- 2 PR 22
- 2 PR 28
- 2 HH-1 (Patent Pending) mounts
- 2 PR 30B
- 1 PR 48
- 2 HM mic clips
- Black hardshell carrying case
- Generating Element: dynamic with strong Neodymium magnet assembly
- Exclusive HEIL Sorbothane isolation system
- Diaphragm: large 1-1/8" Low mass aluminum
- Polar Pattern: cardiod, uniform front to back discrimination
- Finish: matte black
- 3 mesh grills: gold, stainless and black
- Leatherette carrying case with foam windscreen and mic clip
- Dual suspension system between dynamic element and the grille
- Largest dynamic element available
- Smooth response sounding like a ribbon
- Wide frequency response
- Articulate natural mid range
- Ideal for broadcast studios, especially for guitar amp microphone
- Properly positioned humbucking coil and heavy steel case insure maximum shielding
- Assembled and tested in Illinois
- Microphone stand clip included
- 1.5 diaphragm dynamic element
- Utilizes a low-pass filter with a 3dB hinge point at 30Hz and 8.5kHz
- metal housing
- Standard 5/8-27 thread
Your Paypal account , credit card or debit card will not be charged if your order is not in stock or available with the manufacturer. In stock orders are shipped within 1-2 business days (FEDEX tracking details provided). Un-stocked orders require a special order from the manufacturer and ship within 7-10 business days.
The includes a 1 Year return to base warranty. This warranty applies to all equipment which has developed a manufacturer defect during application. Please contact us to confirm the availability and lowest price for any product. For quotes and price matching requests, contact us and include the competing website address.
|Condition||Sealed / New|
Contact us for stock availability , price quotes , expedited shipping quotes or to arrange a return of your (for the full purchase price of ). You may return most new, unopened items within 30 days of delivery for a full refund. AudioDubai are very proud to carry a large selection of gear. You demand quality, reliability, and innovative design from your gear, and we're here to help you find exactly what you need. We're glad to answer any questions you have and you can always depend on AudioDubai to give you the best possible value on musical instruments and accessories with responsive customer service.